Select Processor Type, fill in the name of the processor in the Processor Name, select the communication protocol of the processor in Communication Settings -> Driver click Who Active (select the node address of the processor), In the Rslogix500 software menu, select File -> New, The SLC5 / 05 processor in AB_DF-1 and the SLC processor in AB_ETH-1 are crossed and cannot communicate Return to the Rslinx software and see AB_DF-1, DH-485, and AB_ETH-1, Ethernet. Return to Configure Drivers, see AB_DF1-1 DH485 sta: 0 com1: RUNNING in the Configured Drivers, and click Close. Go back to Configure Drivers and see AB_ETH-1 A-B Ethernet RUNNINGĪvailable Drivers–Select RS-232 DF1 Devices and click Add new to enter Configure Allen-Bradley DF1 Communications Deviceįill in the serial port number in Comm Port, Device must select SLC-CH0 / Micro / PanelView, and then click Auto-Configure, see Auto Configuration Successful on the right! Click OK. After filling in the IP address, click Accept įill in the IP address of the computer, click Accept, and click OK. In the window Configure Driver for Ethernet to PLC-5 or 5820-EI, the user must specify the IP address of the SLC to communicate between the Ethernet SLC and the computer. In Add New Rslinx Driver, the device name specified by the user (generally the default is acceptable), click OKĮnter Configure Driver for Ethernet to PLC-5 or 5820-EI In the Configure Drivers- Available Drivers dialog box, select Ethernet to PLC-5 or 5820-EIĬlick Add new to enter the Add New Rslinx Driver dialog box. In the Rslinx software form menu, select Communications- Configure Drivers (1) RS232 serial cable (model: 1747-CP3) connects the computer serial port and SLC serial port.

Rslogix 500 programming manual